|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Specification AXLE10 Oscillator type : TCXO Parameter Frequency range Standard frequencies Frequency stability Initial tolerance vs. temperature in operating temperature range (steady state) Issue: 02 Date: 2005-05-22 min. 1.25 typ. max. 25 Unit MHz MHz ppm ppm ppm ppm ppm ppm ppm ppm ppm V V % k Condition 12.800 / 19.44 1 Frequency stability -0.5 -1.5 -2.5 0.5 1.5 2.5 0.3 0.1 1 15 4.5 3.0 positive 10 HCMOS 15 45 4.75 3.13 5.0 3.3 5 55 @+25C Temperature - 0C ~ +50C -20C ~ +70C -30C ~ +75C VS 5 % RL 10 % @ +40C Option I "05" "15" "25" vs. supply voltage variation vs. load change long term (aging) per year Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (f / VC) EFC linearity EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS Current consumption (steady state @ +25C) Enable/disable function Operable temperature range Storage temperature range Enclosure (see drawing) Weight Packing ESD Sensitivity 5 0.5 0.3 Option II ="50" Option II ="33" pF ns % @ VS/2 @ VS nom - 5% Option II ="50" Option II ="33" Option II ="50" Option II ="33" 10 ms 5.25 V 3.47 V 10 mA 20 mA Pin 2 = HIGH or OPEN: Output Enable Pin 2 = LOW: Output High Z -40 +85 C -40 +85 C 15.1x9.5x6.0 max mm 3 gram Tape & reel 1500 V IEC 61837 CO 27 IEC 60286-3 HBM as in IEC 610004-2 Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Ordering Code: Model (Specification) AXLE10 Option I 25 Option II Frequency [MHz] 33 12.800 GmbH & Co. KG Wasemweg 5 D-74921 Mosbach Germany AXLE10 page 1(2) www.axtal.com phone: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com Enclosure drawing Pin connections Pin # Symbol 1 VC 2 E/D 3 GND 4 RF OUT 5 N.C. 6 Vs Function Control Voltage (EFC) Enable/Disable Input Ground RF Output No Connection Supply Voltage Note: Length max 15.1 mm, Height max. 6.0 mm Environmental conditions Test Visual inspection, dimensions Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Bump* Free fall* IEC 60068 Part ... IEC 60679-1 clause ... 4.3 4.6.2 4.6.3 Test conditions Enclosure styles as in IEC 60679-3 or 61837, if applicable Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 5)C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Eb, 4000 bumps per Axes, 40g, 6 ms Test Ed procedure 1, 2 drops from 1m height Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Na, 10 cycles at extremes of operating temperature range Test Ba, 16 h at upper temperature indicated by climatic category Test Db variant 1 severity b), 55C/95% r.H., 6 cycles Test Aa, 2 h at lower temperature indicated by climatic category Sequence of 4.6.14, 4.6.15 (1st cycle), 4.6.16, 4.6.15 (5 cycles) Test Ca, 56 days 2-17 2-20 2-58 2-27 2-29 2-32 4.6.8 4.6.6 4.6.9 4.6.7 Vibration, sinusoidal* 2-6 Rapid change of temperature Dry heat Damp heat, cyclic* Cold Climatic sequence* Damp heat, steady state* Endurance tests - ageing - extended aging 2-14 2-2 2-30 2-1 1-7 2-3 4.6.5 4.6.14 4.6.15 4.6.16 4.6.17 4.6.18 4.7.1 4.7.2 30 days @ 85C, OCXO @25C 1000h, 2000h, 8000h @85C GmbH & Co. KG Wasemweg 5 D-74921 Mosbach Germany AXLE10 page 2(2) www.axtal.com phone: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com |
Price & Availability of AXLE10 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |